Epos K1 stativhøyttaler

5 000 kr

Den nye K-Serien er starten på en ny æra for Epos. K1 er den største stativhøyttaleren i denne serien hvis konseptet opprinnelig startet ved å la en tradisjonell kabinetthøyttaler tre inn i nye deler av markedet. Dermed oppstod også ideen om å la høyttaleren være midtpunktet i anlegget. Epos ønsket å gjennomføre dette konseptet uten at det gikk på akkord med selskapets high-end-røtter. K-serien har mange unike designløsninger for å oppnå dette målet – dette inkluderer et stilig utseende, High Velocity Slot Ports (HVSP), bakmonterte drivere, avtagbart bakvegg og oppgraderbar til full aktiv drift. K-serien er mye mer en «enda en høyttalerboks», den representerer  trolig fremtiden!

Varenummer: I/A Kategorier: , , , ,


Within the K-Series are a number of new technologies developed to allow superior performance over previous models.

We have found that, if properly implemented, High Velocity Slot Ports (HVSP) can produce dramatic improvements over conventional cylinder ports. HVSP achieves lower audible distortion, by virtue of its lower intrinsic drag and reduced turbulent airflow within the port. HVSP can also lower air loading to the mid and bass drivers, which helps to keep them operating in a more linear region throughout their excursion range.

In a departure from earlier designs, the port is now located on the front baffle of the cabinet. Using a front firing port, the K-Series offers more flexibility with room placement. They can indeed by positioned closer to a wall, without restricting their operation.

The clever clamping mechanism used to secure the drivers has resulted in an even distribution of tension applied to the surface of the basket. This uniformed clamping pressure helps to reduce unwanted vibrations that would normally result in higher levels of distortion. The end result is a beautifully clear and transparent mid-range quality.

Cabinet colouration is a critical area of a loudspeakers design, that is sometimes overlooked; but not with the K-Series. Not only are the K-Series cabinets carefully braced internally, they have also been developed with removable rear baffles. This is an idea dating back to the ES11 days of Epos, with its sandwich construction method. The theory is to reduce the energy absorbed by the cabinet. One way to achieve this is by making the rear baffle a separate element in the construction. The aim is a reduction in cabinet colouration, or unwanted resonance.

Further performance increases have been achieved with the implementation of high quality crossover components, including the selection of very high-grade polypropylene capacitors and metal oxide resistors. As standard, the K-Series comes pre-wired with Oxygen Free multi-stranded copper wire. Specially designed cable management holes inside the cabinet and high current connectors allow for aftermarket replacement cable sets to be installed, if required.




Using virtual performance CAD simulation tools, Epos has achieved very high performance, and a clean, open yet smooth sound quality from this tweeter.

The tweeter has a low resonance frequency, high sensitivity and extended high frequency response. With a 25mm fabric-dome, short horn, high-temperature ferro-fluid cooled voice-coil, and neodymium magnet, it is capable of high output levels for extended periods without degradation to sound quality.


Mid-Bass Driver

The Epos K1 mid-bass drivers produces an even frequency response and smooth roll-off.

The Epos 150mm mid-bass driver has a high-quality polypropylene cone and a bullet-shaped dust cap. These components form a stiff, yet pliable, well-damped structure which retains its shape even under high power loading.

The K1 mid-bass drivers also benefits from a bucking-magnet system, ensuring all the magnetic force is concentrated around the voice-coil, allowing for low distortion and high efficiency.




In true Epos tradition; the K-series has reverted to a more simplistic passive crossover topology, for which the brand is synonymous.

A first order crossover is used to allow the Epos tweeter to have a wide dynamic range with super low distortion. The mid-bass crossover uses a 2nd order filter ensuring the K1 is an easy load for any amplifier.


tas-poy-2014-logo-final_222pt    whf-4-stars-300x157    hifi-world-5-globes-300x170


Det er ingen omtaler ennå.

Bli den første til å vurdere “Epos K1 stativhøyttaler”

Din e-postadresse vil ikke bli publisert. Obligatoriske felt er merket med *